Send Message
Home > PRODUCTS > SMT Production Line >
Charmhigh CHM-T36VA SMT Pick And Place Machine For PCB Assembly

Charmhigh CHM-T36VA SMT Pick And Place Machine For PCB Assembly

300W SMT Pick Place Machine

CCD SMT Pick Place Machine

Place of Origin:


Brand Name:




Model Number:


Contact Us

Request A Quote
Product Details
2 Head Pick And Place Machine
Power Supply:
Mounting Speed:
6000cph(optimal Without Vision Detection); 2500cph (optimal With Vision Detection)
Control Accuracy:
Control System:
External Computer Required (Windows)
Feeding System:
29 Tape Feeding Stacks;14 Preset General IC Stacks, Work Surface Custom IC Trays And Stick Feeder Supported
Component Type:
0402/0603~5050/SOT/SOP/QFP/QFN/BGA, Etc.
Payment & Shipping Terms
Minimum Order Quantity
1 set
Negotiable Price
Packaging Details
wooden case
Delivery Time
1-3 work days
Payment Terms
T/T, D/P, D/A, L/C
Supply Ability
20 Set/Day
Product Description

Charmhigh CHM-T36VA SMT Pick And Place Machine At Low Cost For PCB Assembly



      The T36VA mounter is suitable for small and medium-sized enterprises' mass production, experimental development, sample trial production and school teaching and so on. The design concept of the machine is to meet the needs of the vast number of small and medium customers, with the rapid and accurate mounting, easy operation, stable running and affordable price. It has a very high performance-price ratio and is your best choice.




Collocate the stepper servo motor
High resolution ration CCD
Double mounting head working at the same time
windows system

Charmhigh CHM-T36VA SMT Pick And Place Machine For PCB Assembly 0

CHM-T36VA Specifications
Dimensions 940mm(L)×710mm(W)×340mm(H)
Weight 39kg
Power Supply

AC220V (50Hz, single phase) /AC110V (60Hz, single phase);


Air Supply No external air supply required
Vacuum Generation Built-in vacuum pump
Mounting Head Quantity 2
Mounting Speed

6000cph(optimal without vision detection);

2500cph (optimal with vision detection)

Control Accuracy 0.025mm
Component Type

0402/0603~5050/SOT/SOP/QFP/QFN/BGA, etc.

(resistor/capacitor/diode/triode/LED/IC, etc.)

PCB Thickness 0.6mm~3.5mm
PCB Size 10mm(L)×10mm(W)~345mm(L)×360mm(W)
PCB Conveying Manual operation
Nozzle Change Manual operation
Control System External computer required (Windows)
Drive System X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported
Transmission System Synchronous belt+ polished rod
Feeding System 29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1;customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported
Vision System Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning



Competitive Advantage:

1. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
2. It has flexible PCB clamping fixture, suitable for different size of PCB
3. It supported custom IC tray. IC tray can be fixed on machine table.
4. wo mountina heads with 2pcs juki Nozzles. vuki nozzle inside maanet. so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
5. Al-in-one machine. 29pcs feeders included in machine. no need to buy other parts. machine is ready to work.
6. Z axis detection, machine’s pull needle automatically return to origin to avoid nozzles broken.
7. Max height component support 5mm.
8. Closed-loop control,xy Axis with encoder, not out of step.
9.PCB calibrated by two components position, then rest components will be calibrated automatically.
10.With vacuum detection. with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then dick a new one to mount again.
11. With vision detection. camera will auto correction component anale and place on PCB board right place. If heads not picking up components. camera will detect it and go back to pick again. 3 times not picking. machine will alarm and stop, after supply material. then continue working. no need to start over again.
12. Comes with convert tool (PC version). edit work file in computer and load work file into machine by USB port. quick and convenient.
13.Support panelized boards.
14 if you dont have PCB file. you can create a new work fle to proaram in machine directly
15.Support single step.
16.Support cut tapesbulk material/tube material.




Charmhigh CHM-T36VA SMT Pick And Place Machine For PCB Assembly 1

Charmhigh CHM-T36VA SMT Pick And Place Machine For PCB Assembly 2


1. Q: How many nozzles do you supply? Do you sell nozzles and spares?

A: The CHM-T36VA has two nozzle-heads, we supply 4 nozzles. Yes, we do sell nozzles and spares. If you need any spars, just let us know.

2. Q: Do you provide software updates?

A: Customers who buy our machines, we can offer free upgrades software for you.




Send your inquiry directly to us

Privacy Policy China Good Quality SMT Pick And Place Machine Supplier. Copyright © 2021-2023 . All Rights Reserved.