Charmhigh CHM-T36VA Smt Pick & Place Production Assembly Line In Manufacturing
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
6000cph(optimal without vision detection);
2500cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
|Control System||External computer required (Windows)|
|Drive System||X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt+ polished rod|
|Feeding System||29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
Standard Accessories for CHM-T36VA:
1) Pick and Place MachineCHM-T36VA: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pin: 1
6) Coil for pull pin:1
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
3. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
4. It has flexible PCB clamping fixture, suitable for different size of PCB
5. It supported custom IC tray. IC tray can be fixed on machine table.
6. wo mountina heads with 2pcs juki Nozzles. vuki nozzle inside maanet. so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
7. Al-in-one machine. 29pcs feeders included in machine. no need to buy other parts. machine is ready to work.
8. Z axis detection, machine’s pull needle automatically return to origin to avoid nozzles broken.
9. Max height component support 5mm.
10. Closed-loop control,xy Axis with encoder, not out of step.
11.PCB calibrated by two components position, then rest components will be calibrated automatically.
12.With vacuum detection. with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then dick a new one to mount again.
13. With vision detection. camera will auto correction component anale and place on PCB board right place. If heads not picking up components. camera will detect it and go back to pick again. 3 times not picking. machine will alarm and stop, after supply material. then continue working. no need to start over again.
Why choose Charmhigh?
1.Light weight body,occupy small area
2.User friendly interface.no need professional SMT engineer.entry-level device
3.High integrated,no need extra pump or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Low cost.reduce expense to own a professional automatic SMT production line
6.international express with door to door service.3-5 working days delivery
7.Especial for laboratory research and development.samples to avoid any patents and designs revealment
Let us help you make educated decisions for your next pick and place machine
Send us your BOM & we'll recommend the right pick & place machine for your needs.
Contact Us at Any Time