Place of Origin:
China
Brand Name:
Charmhigh
Certification:
CE
Model Number:
CHM-T48VB
Contact Us
Benchtop pick and place model with Vision equipment offers technologically advanced, low cost solutions for low to medium volume SMT placement applications. The T48VB is specifically designed for facilities where quick setup, ease of operation and high reliability are paramount.
MAIN FEATURES
The highest quality with advanced technology at a cost effective solution
Placement rates up to 3500 cph
The best GUI (graphical user interface) in its class using linux-based software allows a new board to be programmed in minutes
Up to 58 tape feeders
Accurately places a wide range of components including 0402s, LED’s, BGAs, QFPs, SMT Connectors and many others
Precision placement head design with closed-loop logic
Self contained no shop air required
| CHM-T48VB Specifications | |
| Dimensions | 1310mm(L)×710mm(W)×340mm(H) |
| Weight | 49kg |
| Power Supply |
AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 300W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed |
6000cph(optimalwithout vision detection); 4000cph (optimal with vision detection) |
| Control Accuracy | 0.025mm |
| Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System |
Built-in computer(embedded Linux operating system), 7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt + polished rod +linear guide |
| Feeding System | 58 tape feeding stacks(8mm:44,12mm:8；16mm:4,24mm:2；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Send your inquiry directly to us
