2023 New Product Charmhigh CHM-550 Desktop SMT 4 Head Table Top 0201l Pick And Place Pcb Machine
The design and installation method of the High-end pick and place machine is adopted to solve the deformation of the X-axis due to long-term load operation, ensure long-term working stability, and improve placement accuracy.
Speed test; (Everything speaks with data, reject false advertising!)
According to the industry standard IPC9850 of the pick and place machine, the actual placement speed is a true test of the speed
About Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-36VA of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-T48VA of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-4T8VB of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-T510LP4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-T530P4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-T560P4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-860 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
CHM-861L of Hunan Charmhigh Electromechanical Equipment Co., Ltd
|Dimensions||980mm(L)X 1050mm(W) X 880mm(HD)|
|Power Supply||AC220V (50Hz,single phase) 600W|
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Vacuum generator (Japan PISCO)|
|Mounting Head Quantity||4|
|Mounting Speed||6500cph ( Visual inspection) IPC9850: 5000CPH|
|Mounting Accuracy||±60μm@μ±3σ/chip CPK≥1.0(XY)|
|Nozzle Change||Automatic nozzle change (13 hole nozzle library)|
Built-in industrial computer (Windows 7)
equipped with monitor, keyboard, and mouse
|Drive System||X&Y axis driven by servo motors;adopting flexible S-curve acceleration and deceleration|
|Transmission System||Ball screw + linear guide|
50 Yamaha 8mm standard pneumatic/electric feeder stacks
(also suitable for IC tray and stick feeder)
Snapshot camera×4 (component size applicable: 14mm×14mm);
IC camera×1 (component size applicable: 25mm×25mm);
1. Whether the linear guide rail and round rod have an impact on the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no effect on the accuracy of the mounting machine, the precision of the mounting machine depends on the motor and software control system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
3. Do you use electromagnetic coil to control the pulling needles? What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic coil. Comparing with the cylinder control, the electromagnetic coil control has the characteristics of faster response, softer force and less noise. The quick reaction can speed up the mounting speed; Soft strength refers to the strength of the pull needle is soft when pressing down, and the pull needle is not easy to break.
Contact Us at Any Time