Charmhigh Chm-861 Automatic Pick and Place Machine for PCB Assembly
|Power Supply||AC380V (50Hz, three phase), 4.5kW|
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||8|
|Mounting Speed||36000cph (optimal)|
|PCB Conveying||3-section-rail automatic conveying, PCB support|
|Nozzle Change||Automatic nozzle change (37-hole nozzle library)|
Built-in industrial computer (Windows 7)
equipped with monitor, keyboard, and mouse
|Drive System||X&Y axis driven by Panasonic A6 servo motors (Y axis by double motors); adopting flexible S-curve acceleration and deceleration|
|Transmission System||X&Y axis adopting THK ground ball screw and THK mute linear guide (Y axis with double screws)|
100 NXT 8mm standard feeder stacks
(also suitable for IC tray and stick feeder)
Fly camera×8 (component size applicable: 16mm×16mm);
IC camera×1 (component size applicable: 36mm×36mm);
Mark camera×2 (digital camera)
1.Machines need keeping away from the humid environment and dust, or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be broken.
4.Don’t touch the optical axis and the mounting head, or which may damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place where the babies can’t touch.
8.Don’t take the pulling needle stretch out for too long time, or the pulling needle will be broken.
9.Don’t take the machine in the Sun or the highlight directly, or which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.
Contact Us at Any Time