Place of Origin:
29 tape feeding stacks SMT Pick and Place Machine with built-in PC CHM-T36
CHM-T36 is a small desk-top pick and place machine of Hunan Charmhigh Electromechanical Equipment Co., Ltd.
It has 29 tape feeding stacks, support for stick feeders, 8 general IC stacks preset at the front end and several self-defined IC tray stacks in the rear integrated operation with built-in industrial computer.
Besides, CHM-T36 possesses the capability of automatic detection of Z axis.
1) Laser positioner, easy for online programming.
2) Own vacuum testing, if one component suck crooked, will throw to the deposit area, then re-pick and place again..
3) Dual pick and place head design helps increase output, 2pcs juki nozzles, change quikcly and easy.
4) Dual built-in mute type pumps (cost and room saving, no need to prepare additional pump)
5) Standard 8G SD card, mass storage of CSV working file
6) Ful touch screen interface input/output, easy operation
7) Integrated Automatic Feeders Automatic Nylon Spool Wheel
8) support single step, easy operation.
AC220V (50Hz, single phase) / AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
|Mounting Speed||6000cph (optimal)|
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
|Control System||Embedded real-time operating system, 5-inch touch screen|
|Drive System||X&Y-axis driven by stepping motors; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt + polished rod|
|Feeding System||29 tape feeding stacks (8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 8 preset general IC stacks, worksurface custom IC trays supported|
|Positioning Mode||Laser positioning|
The structure of CHM-T36
FAQ about the pick and place machine
1. Whether the round rod and the linear guide rail have an impact on the accuracy of the SMT pick and place machine ?
No impact at all .
Using linear guide rail or round rod has no effect on the accuracy of the SMT machine, the precision of the SMT machine depends on the motor and software control system used by the SMT machine .
2. Is the software control system of your SMT independently developed by your company?
Yes, our desktop SMT machine uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
3. Do you use electromagnetic coil to control the pulling needles? What are the advantages if comparing to cylinder control?
Yes, the pull needle we use is controlled by the electromagnetic coil. Comparing with the cylinder control, the electromagnetic coil control has the characteristics of faster response, softer force and less noise. The quick reaction can speed up the mounting speed; Soft strength refers to the strength of the pull needle is soft when pressing down, and the pull needle is not easy to break.
This SMT machine will be tested well before ship out.
Tools and manuals are complete included in the package.
Each machine 100% test well before ship out.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
If you want to get more information ,Please don't hesitate to contact me,we will response you at first time.
WhatsApp/WeChat ID :+86 19974864109
Send your inquiry directly to us