Charmhigh Automatic Calibration PCB Smt Assembly Machine For Small Parts
CHM-T510LP4 Introduction
The CHM-T510LP4 can not only place LED without vision ,but also place small components,suitable for 0402,0603,0805-5050,SOP,QFN,LQFP144,DIode,transistor..etc.
It has double CCD vision cameras,which can auto calibrate the offset for all different kinds of components and ICs ,auto correction of pick position and angle.
Specifications Of CHM-T510LP4
| CHM-T510LP4 Specifications |
| Dimensions |
2060mm(L)×605mm(W)×700mm(H) |
| Weight |
145kg |
| Power Supply |
AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W |
| Air Supply |
0.5MPa ~0.7MPa |
| Vacuum Generation |
Built-in vacuum pump |
| Mounting Head Quantity |
4 |
| Mounting Speed |
11000cph(optimal without vision detection);
5500cph (optimal with vision detection)
|
| Control Accuracy |
0.015mm |
| Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc.
(resistor/capacitor/diode/triode/LED/IC, etc.)
|
| PCB Thickness |
0.6mm~3.5mm |
| PCB Size |
10mm(L)×10mm(W)～1200mm(L)×240mm(W) |
| PCB Conveying |
Manual operation |
| Nozzle Change |
Manual operation |
| Control System |
Built-in computer (embedded Linux operating system),
7-inch touch screen
|
| Drive System |
X&Y-axis driven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
| Transmission System |
Synchronous belt+ linear guide |
| Feeding System |
8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported |
| Vision System |
Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
8 pcs Yamaha pneumatic feeders supported
CHM-T510LP4 works with standard Yamahapneumatic feeder ,it is more stable and longer lifetime.Yamaha pneumatic feeder accept by customers and for years of marketing experience ,and CHM-T510LP4 also accept Yamaha vibration feeder.They are easy to get replacement in the future.
Industry touch screen simple and convenient
no need external computer ,no need external screen ,just need to prepare an air compressor for supplying air for feeder
There is a embedded linux operation system,industry and more stable system,strong compatibility
machine itself has built-in 7 inch full touch screen,external usb mouse also accepted .very easy and convenient operation .Quick start just need half an hour.
Our Service
The SMT machine will be tested 100% well before ship out.
Tools and manuals are complete included in the package.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
Your message must be between 20-3,000 characters!
