Pick and place machine is the most important equipment in the SMT production line, and it is also the equipment with the highest investment in the SMT production line. Therefore, it is necessary to use pick and place machine reasonably to maximize the service life of pick and place machine and effectively save costs. How to improve the service life of pick and place machine? Charmhigh Electromechanical teaches you how to improve the service life of SMT pick and place machines.
First of all, the maintenance of pick and place machine is very important
1. Regularly clean, remove and wash the dust and scale on the surface of the circuit board and pick and place machine to avoid poor heat dissipation inside the equipment due to scale and dust, which may cause the equipment to overheat and burn out.
2.Disassemble and clean the electromagnetic valve, internal air circuit, vacuum generating device, cylinder, etc. of the equipment; if the oil dirt in the air circuit cannot be cleaned in time, it will block the air circuit, causing the air circuit to be blocked, resulting in high throwing material; In severe cases, it will corrode the internal sealing rings and components of solenoid valves, vacuum generators, cylinders, etc., resulting in damage to components and affecting the normal production of equipment.
3.The equipment of pick and place machine manufacturer has passed the warranty period, and it has been running for a long time, so it is impossible to carry out comprehensive and professional maintenance on the equipment.There are hidden dangers in some parts of the equipment, and the equipment needs to be extensively maintained.Timely check and discover hidden dangers in the equipment and solve them, thereby reducing the frequency of equipment failures and improving production efficiency.
4. After long-term operation of the equipment, the relevant parts of the equipment may be worn, aged, and displaced. The most original parameters of the equipment can no longer adapt to the status quo of the equipment, and the mounting accuracy of the equipment has been seriously affected. Therefore, the equipment must be regularly checked. Calibrate to make the equipment produce in the state of highest precision and improve the quality of the product.
5.Periodic maintenance of the equipment, and reasonable planning of the maintenance cycle according to the company's production conditions can effectively reduce the throwing rate, reduce the number of alarms, improve machine production efficiency, and reduce pick and place machine failures.
6. (Prevent oxidation and corrosion of rolling elements) Work in a humid environment for a long time and be easily affected by moisture, which requires lubricants with better anti-emulsion properties. The type of installation is more complicated, and the dust in the air enters the hydraulic system, causing serious lubricant pollution, which requires the user to wipe and replace the lubricant frequently.
For SMT mounting and processing enterprises, improving the service life of pick and place machines can not only save costs, but also improve production efficiency. As long as pick and place machine is used reasonably and pick and place machine is maintained, the service life of pick and place machine will be improved and the value of pick and place machine will be maximized.
To choose SMT pick and place machine production, you must find a powerful enterprise. Hunan Charmhigh Electromechanical Co., Ltd. is a leading domestic high-end SMT intelligent equipment and actively participates in international level homogeneous competition! With more thorough customization, better quality, and better service, it is an enterprise that provides intelligent products and optimized solutions for the transformation, product upgrading, and large-scale production of various domestic and foreign enterprises in an all-round way.
Send your inquiry directly to us