High Quality SMT Desktop Small Mini Pick And Place Machine CHM-T530P4
This is CHM-T530P4, a high-performance pick and place machine of Hunan Charmhigh Electromechanical Equipment Co., Ltd.
It is characterized by 30 feeder stacks, support for Yamaha pneumatic feeders, electric feeders, and stick feeders with tubular components,
4 heads capable of 360-degree rotation, automatic correction to pick components, automatic positioning through recognition of Mark Point, and integrated operation
with built-in industrial computer.
Besides, the X and Y axes of CHM-T530P4 are driven by high-voltage stepping motor. And its Z axis is capable of reset detection.
CHM-T530P4 possesses the capability to mount small components with 0402
as the minimum one.
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);400W
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||4|
8000cph(optimalwithout vision detection);
5500cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer (embedded Linux operating system),
7-inch touch screen
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration|
|Transmission System||Synchronous belt + linear guide|
30 Yamaha standard pneumatic feeder stacks
(also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
Automatical Pick and place machine :The CHM-T530P4 with Vision system ,
the speed can reach 8000cph
The software operation interface is simple and easy to use
Four taps work at the same time, the speed is faster. The four taps can rotate 360 degrees, and the angle rotation linkage is completed, which does not affect the mounting efficiency. The z-axis can detect the height and angle of the four taps, so as to ensure the stability of different original devices when the span is large
PCB clamping area: maximum support 400 mm* 330mm, suitable for PCB board of various processes
Dual vision calibration can accurately calibrate IC devices and automatically correct the reclaiming error. Industrial high-precision CCD is used to collect IC pins to ensure more accurate calculation and mounting accuracy
Support tube loading material: tube loading feeder can support three tube and five tube material assembly, and the amplitude and height can be adjusted to achieve wider mounting efficiency
1. Q: How many nozzles do you supply? Do you sell nozzles and spares?
A: The CHM-T530P4 has four nozzle-heads, we supply 4 nozzles. Yes, we do sell nozzles and spares. If you need any spare parts, just let us know.
2. Q: Do you prquired?
A: Oil free compressor and air dryer be used.ovide software updates?
A: Customers who buy our machines, we can offer free upgrades software for you.
3. Q: What air supply is re
4.Q: Whether the linear guide rail and round rod have an impact on the accuracy of the SMT pick and place machine ?
A:No impact at all .Using linear guide rail or round rod has no effect on the accuracy of the mounting machine, the precision of the mounting machine depends on the motor and software control system used by the mounting machine only.
5. Q:Is the software control system of your desktop SMT independently developed by your company?
A:Yes, our desktop SMT uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
6. How about the warranty?
A: We support one year warranty.
If you want to get more information ,Please don't hesitate to contact me,we will response you at first time.
WhatsApp/WeChat ID :+86 18100733752
Contact Us at Any Time