Home
>
PRODUCTS
>
SMT Production Line
>
|
| Place of Origin | China |
| Brand Name | Charmhigh |
| Certification | CE |
| Model Number | CHM-T36VA |
AC220V CHM-T36VA Smt Pick & Place Placement Machine For Pcb Assembly
| CHM-T36VA Specifications | |
| Dimensions | 940mm(L)×710mm(W)×340mm(H) |
| Weight | 39kg |
| Power Supply |
AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 300W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed |
6000cph(optimal without vision detection); 2500cph (optimal with vision detection) |
| Control Accuracy | 0.025mm |
| Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | External computer required (Windows) |
| Drive System | X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt+ polished rod |
| Feeding System | 29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Standard Accessories for CHM-T36VA:
1) Pick and Place MachineCHM-T36VA: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pin: 1
6) Coil for pull pin:1
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
Competitive Advantage:
3. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
4. It has flexible PCB clamping fixture, suitable for different size of PCB
5. It supported custom IC tray. IC tray can be fixed on machine table.
6. wo mountina heads with 2pcs juki Nozzles. vuki nozzle inside maanet. so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
7. Al-in-one machine. 29pcs feeders included in machine. no need to buy other parts. machine is ready to work.
8. Z axis detection, machine’s pull needle automatically return to origin to avoid nozzles broken.
9. Max height component support 5mm.
10. Closed-loop control,xy Axis with encoder, not out of step.
11.PCB calibrated by two components position, then rest components will be calibrated automatically.
12.With vacuum detection. with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then dick a new one to mount again.
13. With vision detection. camera will auto correction component anale and place on PCB board right place. If heads not picking up components. camera will detect it and go back to pick again. 3 times not picking. machine will alarm and stop, after supply material. then continue working. no need to start over again.
14. Comes with convert tool (PC version). edit work file in computer and load work file into machine by USB port. quick and convenient.
15.Support panelized boards.
16 if you dont have PCB file. you can create a new work fle to proaram in machine directly
17.Support single step.
18.Support cut tapesbulk material/tube material.
Why choose Charmhigh?
1.Light weight body,occupy small area
2.User friendly interface.no need professional SMT engineer.entry-level device
3.High integrated,no need extra pump or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Low cost.reduce expense to own a professional automatic SMT production line
6.international express with door to door service.3-5 working days delivery
7.Especial for laboratory research and development.samples to avoid any patents and designs revealment
FAQ
1. Q: How many nozzles do you supply? Do you sell nozzles and spares?
A: The CHM-T36VA has two nozzle-heads, we supply 4 nozzles. Yes, we do sell nozzles and spares. If you need any spars, just let us know.
2. Q: Do you provide software updates?
A: Customers who buy our machines, we can offer free upgrades software for you.
3. Q: What air supply is required?
A: Oil free compressor and air dryer be used.
4. How about the warranty?
A: We support one year warranty. We will regularly update the software for customers. If there is any doubt in the process of operating the machine, please feel free contact us.
All the spare parts will be provided free of charge for you within the warranty period.
Contact Us at Any Time
