Charmhigh Desktop Smt Pick And Place Machine CHM-T48VB With Vision
Hunan Charmhigh Electromechanical Equipment Co., Ltd is the well-known manufacturer of high-end SMT equipment in China.
The company is located in the Changsha High-tech Development Zone,covering a total area of 3600 square meters.
As a professional modern science and technology enterprise capable of both R&D,production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of "Customer First, Innovation Paramount", Charmhigh has won the hearts of thousands of customers all over the world.
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
6000cph(optimalwithout vision detection);
4000cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer(embedded Linux operating system),
7-inch touch screen
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt + polished rod +linear guide|
|Feeding System||58 tape feeding stacks(8mm:44,12mm:8；16mm:4,24mm:2；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
Machine features and advantages:
With Vision system , and embedded computer with Linux system.
With closed loop control. can move more faster and smoothly
with 58pcs feeders, more effective. can work with more kinds of components.
with 9 kinds of different nozzles, can place with 0201, 0402, 0603, 0805-505 etc, and QFN, SOP, LQFP. all kinds of IC. and diode, triode.
with Z axis detection can self-checking the height and angle during placement. can make sure this machine work well with various kinds of components.
We can supply English machine operation manual and technical support. Please be confident to make the purchase.
Up & Down Double Vision Camera
CHM-T36VA has double CCD vision cameras, which can auto calibrate the offset for all different kinds of component and ICs, auto correction of pick position and angle ,it is industry camera with high accuracy taking image of IC, to make sure the accuracy, calibrate two component of offset and rotation for PCB.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfect.
58pcs Feeders Supported
44pcs 8mm, 8pcs 12mm, 4pcs 16mm, 2pcs 24mm.
Z axis Detection
Z axis detection can self-checking the height and angle during placement. make sure machine work perfectly with different kinds of components. nozzles are Juki, magnet inside, use your finger can remove it down, no need wrench , very convenient.
Visual industrial control- easy operation
Embedded good quality industrial PC with Linux system. Powerful function, run smoothly. 7 inch LCD touch screen has a wide vision easy learning and operation.
9 kinds of different Juki nozzle supported
High precision placement
Machine can install 501-508 kinds of Juki nozzles
Able to mount 0201,0402,0603,0805-5050,SOP,QFN,LQFP144,all kinds of IC, and diode, triode…
1. Whether the linear guide rail and round rod have an impact on the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no effect on the accuracy of the mounting machine, the precision of the mounting machine depends on the motor and software control system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
3. Do you use electromagnetic coil to control the pulling needles? What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic coil. Comparing with the cylinder control, the electromagnetic coil control has the characteristics of faster response, softer force and less noise. The quick reaction can speed up the mounting speed; Soft strength refers to the strength of the pull needle is soft when pressing down, and the pull needle is not easy to break.
Contact Us at Any Time