STENCIL PRINTER CHM-T3040
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
6000cph(optimalwithout vision detection);
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer(embedded Linux operating system),
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt + polished rod +linear guide|
|Feeding System||58 tape feeding stacks(8mm:44,12mm:8；16mm:4,24mm:2；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
CHM-T48VB is an update version of CHMT48VA, which included dual side feeders with total 58pcs (left 29pcs + right 29pcs). With more feeders it can install more different kinds of materials.
Machine features and advantages:
With Vision system , and embedded computer with Linux system.
With closed loop control. can move more faster and smoothly
with 58pcs feeders, more effective. can work with more kinds of components.
with 9 kinds of different nozzles, can place with 0201, 0402, 0603, 0805-505 etc, and QFN, SOP, LQFP. all kinds of IC. and diode, triode.
with Z axis detection can self-checking the height and angle during placement. can make sure this machine work well with various kinds of components.
We can supply English machine operation manual and technical support. Please be confident to make the purchase.
Up & Down Double Vision Camera
CHM-T36VA has double CCD vision cameras, which can auto calibrate the offset for all different kinds of component and ICs, auto correction of pick position and angle ,it is industry camera with high accuracy taking image of IC, to make sure the accuracy, calibrate two component of offset and rotation for PCB.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfect.
58pcs Feeders Supported
44pcs 8mm, 8pcs 12mm, 4pcs 16mm, 2pcs 24mm.
Z axis Detection
Z axis detection can self-checking the height and angle during placement. make sure machine work perfectly with different kinds of components. nozzles are Juki, magnet inside, use your finger can remove it down, no need wrench , very convenient.
Visual industrial control- easy operation
Embedded good quality industrial PC with Linux system. Powerful function, run smoothly. 7 inch LCD touch screen has a wide vision easy learning and operation.
9 kinds of different Juki nozzle supported
High precision placement
Machine can install 501-508 kinds of Juki nozzles
Able to mount 0201,0402,0603,0805-5050,SOP,QFN,LQFP144,all kinds of IC, and diode, triode…
Standard Accessories for CHMT48VB:
1) Pick and Place MachineCHMT48VB: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pins: 2
6) Coil for pull pin:1
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
Household appliances industry, Auto electronics industry, Power industry, LED industry, security, instruments and meters industry, communications industry, intelligent control industry, Internet of Things(IOT) industry and military industry, etc.
Package Weight: 85.0kg
Package Size: 116cm*80cm*52cm
Packing: wooden case (safe packing)
Our company Hunan Charmhigh Electromechanical Equipment Co., Ltd. is located in the Changsha High-tech Development Zone, covering a total area of 3600 square meters ,with more than 100 employees here.
As a professional modern science and technology enterprise capable of both R&D, production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of “Customer First, Innovation Paramount”, Charmhigh has enjoyed high fame at home and abroad.
If you have interest in our products please kindly contact me I will give you immediate reply .
Thanks & best regards
Hunan Charmhigh Electromechanical Equipment Co., Ltd.
Add.:104-604,Building D,Jingrong Tongxin International Industrial Park(jindao Park),NO 179 ,Huizhi Middle Road,HI-TECH Development Zone,Changsha ,Hunan,P.R.China
Contact Us at Any Time