Place of Origin:
CHINA
Brand Name:
Charmhigh
Contact Us
High Precision AC220V SMT Line Equipment , Pick And Place Equipment
| CHM-T36VASpecifications | |
| Dimensions | 940mm(L)×710mm(W)×340mm(H) |
| Weight | 39kg |
| Power Supply |
AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 300W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed |
6000cph(optimalwithout vision detection); 2500cph (optimal with vision detection) |
| Control Accuracy | 0.025mm |
| Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | External computer required (Windows) |
| Drive System | X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt+polished rod |
| Feeding System | 29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCBcalibration via Mark Point and component positioning |
| Dimensions | 540mm×380mm×390mm |
| Net Weight | 20kg |
| Work Table Size | 300mm×400mm |
| Maximum Printable Size | 300mm×400mm |
Maximum Net Frame Size |
370mm×470mm |
| Printing Speed | Manual Control |
| Thickness of Printable Substrate | 0mm ~ 80mm |
|
Work Table
Horizontal Adjustable Volume
|
10mm |
Printing Platform Height |
190mm |
|
Repeated Printing Accuracy
|
±0.01mm |
| Positioning Mode |
Border positioning or
benchmark hole positioning
|
| Dimensions | 420mm×405mm×265mm |
| Net Weight | 20kg |
| Rated Power | 2500W (peak power) |
| Rated Voltage | AC220V 50Hz/60Hz |
| Drawer Size | 300mm×300mm |
| Soldering Type | Lead Soldering / Lead-free Soldering |
| Maximum Soldering Temperature | 300°C |
| Heating Mode | Infrared ray & hot air |
| Temperature Control Accuracy | ±1°C (at constant temperature) |
| Soldering Cycle | 5 ~ 10 minutes |
| Saved Reflow Curve Quantity | 8 |
Product Features:
Hot air and IR mixed heating, heat evenly, welding speed fast, short cycle;
8 reflow profile is optional, flexible production;
Simple calibration curve, just adjust a few parameters, the machine can automatically generate curves and visually displayed;
Built-in PID controllers, high precision temperature control;
Drawer window design, commissioning and easy to use;
The use of special high alloy filament lamp life;
Dual sensor temperature;
Use iron double ball bearing fan, high temperature, long life;
Use pure stainless steel liner;
Drawer rail support with high temperature, easy to use;
Tight insulation processing;
Using industrial-grade display and control circuit;
Simple, intuitive, and efficient man-machine interface design.
Send your inquiry directly to us
