Place of Origin:
CHINA
Brand Name:
Charmhigh
Contact Us
CHM-T560P4 730mm PCB Manufacturing Line , PCB Reflow Oven Closed Loop Control
| CHM-T560P4Specifications | |
| Dimensions | 1180mm(L)×870mm(W)×640mm(H) |
| Weight | 140kg |
| Power Supply |
AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 400W |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 4 |
| Mounting Speed |
8000cph(optimalwithout vision detection); 5500cph (optimal with vision detection) |
| Control Accuracy | 0.015mm |
| Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～400mm(L)×290mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System |
Built-in computer (embedded Linux operating system), 7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
| Transmission System | Synchronous belt + linear guide |
| Feeding System |
60 Yamaha 8mm standard pneumatic feeder stacks (also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
| Dimensions | 540mm×380mm×390mm |
| Net Weight | 20kg |
| Work Table Size | 300mm×400mm |
| Maximum Printable Size | 300mm×400mm |
Maximum Net Frame Size |
370mm×470mm |
| Printing Speed | Manual Control |
| Thickness of Printable Substrate | 0mm ~ 80mm |
|
Work Table
Horizontal Adjustable Volume
|
10mm |
Printing Platform Height |
190mm |
|
Repeated Printing Accuracy
|
±0.01mm |
| Positioning Mode |
Border positioning or
benchmark hole positioning
|
| Model | T-961 |
| The heating zone quantity | upper3/down3 |
| The length of the heating zone | 730mm |
| The heating type | intelligent level sirocco and rapid infrared heating |
| The cooling zone quantity | 1 |
| Maximum width of PCB board | 230mm |
| The operation direction | left→right |
| Delivery options | Net transmission&chain transmission |
| The speed of conveyer belt | 0-290mm/min |
| The power supply | 220V 50/60Hz |
| Peak power | 3.5KW |
| Heating up time | Around 7mins |
| Temperature control range | Room temperature-300 |
| Temperature control mode | PID closed-loop control |
| Temperature control accuracy | ±1 |
| PCB temperature distribution deviation | ±2 |
| Overall dimensions | 1000×466×445mm |
| Machine weight | 70KG |
CHM-T560P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHM-T530P4 using 501---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.
Notes
1.Machines need keeping away from the humid environment and dust, or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be broken.
4.Don’t touch the optical axis and the mounting head, or which may damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place where the babies can’t touch.
8.Don’t take the pulling needle stretch out for too long time, or the pulling needle will be broken.
9.Don’t take the machine in the Sun or the highlight directly, or which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.
If you want to get more information ,Please don't hesitate to contact me,we will response you at first time.
Tech support:
Tel:+86 19974864383/0731-85504084
Email:shelleywu@charmhigh.com
one@charmhigh. com
Skype/WhatsApp/WeChat ID :+86 19974864383
website:Http://en.charmhigh.com
Send your inquiry directly to us
