PID Closed Loop Control 290mm/Min SMT Production Line Reliable
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||4|
8000cph(optimalwithout vision detection);
5500cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer (embedded Linux operating system),
7-inch touch screen
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration|
|Transmission System||Synchronous belt + linear guide|
60 Yamaha 8mm standard pneumatic feeder stacks
(also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
|Work Table Size||300mm×400mm|
|Maximum Printable Size||300mm×400mm|
Maximum Net Frame Size
|Printing Speed||Manual Control|
|Thickness of Printable Substrate||0mm ~ 80mm|
Horizontal Adjustable Volume
Printing Platform Height
Repeated Printing Accuracy
Border positioning or
benchmark hole positioning
|The heating zone quantity||upper3/down3|
|The length of the heating zone||730mm|
|The heating type||intelligent level sirocco and rapid infrared heating|
|The cooling zone quantity||1|
|Maximum width of PCB board||230mm|
|The operation direction||left→right|
|Delivery options||Net transmission&chain transmission|
|The speed of conveyer belt||0-290mm/min|
|The power supply||220V 50/60Hz|
|Heating up time||Around 7mins|
|Temperature control range||Room temperature-300|
|Temperature control mode||PID closed-loop control|
|Temperature control accuracy||±1|
|PCB temperature distribution deviation||±2|
CHM-T560P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHM-T530P4 using 501---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.
Import Taxes Or Duties
1). Import duties, taxes and charges are not included in the item price or shipping charges,These
charges are the buyer' s responsibility.
2).Please check with your country' s customs office to determine what these additional costs will be
prior to bidding/buying.
3).Please confirm detailed information about delivery invoice, like how much price we should write
on delivery invoice, how much transportation charge we should write on invoice , how to describe
the goods etc.
4).These charges are normally collected by the delivering freight (shipping) company or when you
pick the item up-do not confuse them for additional shipping charge.
Contact Us at Any Time