Place of Origin:
China
Brand Name:
Charmhigh
Certification:
CE
Model Number:
CHM-T36
Contact Us
Electronics DIY Prototype SMT Placement Machine Single Phase
This is CHM-T36, a small desk-top pick and place machine of Hunan Charmhigh Electromechanical Equipment Co., Ltd.
It is characterized by 29 tape feeding stacks, support for stick feeders, 8 general IC stacks preset at the front end and several self-defined IC tray stacks in the rear integrated operation with built-in industrial computer.
Besides, CHM-T36 possesses the capability of automatic detection of Z axis.
| CHM-T36 Specifications | |
| Dimensions | 930mm(L)×690mm(W)×310mm(H) |
| Weight | 37kg |
| Power Supply |
AC220V (50Hz, single phase) / AC110V (60Hz, single phase); 250W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed | 6000cph (optimal) |
| Control Accuracy | 0.025mm |
| Component Type |
0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×410mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | Embedded real-time operating system, 5-inch touch screen |
| Drive System | X&Y-axis driven by stepping motors; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt + polished rod |
| Feeding System | 29 tape feeding stacks (8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 8 preset general IC stacks, worksurface custom IC trays supported |
| Positioning Mode | Laser positioning |
FAQ
1. Whether the linear guide rail and round rod have an impact on the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no effect on the accuracy of the mounting machine, the precision of the mounting machine depends on the motor and software control system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
3. Do you use electromagnetic coil to control the pulling needles? What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic coil. Comparing with the cylinder control, the electromagnetic coil control has the characteristics of faster response, softer force and less noise. The quick reaction can speed up the mounting speed; Soft strength refers to the strength of the pull needle is soft when pressing down, and the pull needle is not easy to break.
Our Service
This SMT machine will be tested well before ship out.
Tools and manuals are complete included in the package.
The machine has a warranty period of 1 year from the time of purchase and lifetime service.
Each machine 100% test well before ship out.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
Send your inquiry directly to us
