8 Feeders SMT Placement Machine
|Power Supply||AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W|
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||4|
11000cph(optimalwithout vision detection);
5500cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer (embedded Linux operating system),
7-inch touch screen
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration|
|Transmission System||Synchronous belt+linear guide|
|Feeding System||8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
CHM-T510LP4 is an professional LED design pick and place machine. with 1.2M moving table, it has 4heads and 8pcs Yamaha feeders.
This machine is not only for LED patching work, also can work with 0402. 0603, 0805-5050, SOP, QFN, LQFP, Diode, Transistor.
within embedded industry PC and Linux system. the main board of the machine was developed by ourselves, with good quality and long lifetime. Please buy with confidence.
Automatic of EX axis
High speed movement can assemble a PCB of 1200mm length
High speed movement, highly accurate
Magnetic plate positioning
Check make point visually and automatically, effective and accurate
EX axis covered by magnetic plate, can suitable for various PCB of different size and shape, precise positioning, good performance, easy operation
8pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T510LP4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement.
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Hunan Charmhigh Electromechanical Equipment Co., Ltd
Contact Us at Any Time