CHM-T48VA 4000cph PCB Pick And Place Machine Manual Nozzle Change
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
6000cph(optimalwithout vision detection);
4000cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer (embedded Linux operating system),
7-inch touch screen
|Drive System||X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt+polished rod|
|Feeding System||29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feedersupported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
The new vision system CHM-T48VA is independent product of Charmhigh, with advanced technology in China, special for research Lab, medium enterprise, small factories, Electronics enthusiasts or enterpreneur etc. It is small with high precision, accurate positioning, easy operation with stable performance. It is the best small desktop PNP machine in China, Now leading the technology in China.
here are some highlights as follows:
With Vision system , and embedded computer with Linux system.
With closed loop control. can move more faster and smoothly
With 29pcs feeders, more effective. can work with more kinds of components.
With 9 kinds of different nozzles, can place with 0201, 0402. 0603, 0805-505etc, and QFN, SOP, LQFP. all kinds of IC. and diode, triode.
With Z axis detection can self-checking the height and angle during placement. can make sure this machine work well with various kinds of components.
We can supply English machine operation manual and technical support. Please be confident to make the purchase.
Up & Down Double Vision Camera
CHM-T36VA has double CCD vision cameras, which can auto calibrate the offset for all different kinds of component and ICs, auto correction of pick position and angle ,it is industry camera with high accuracy taking image of IC, to make sure the accuracy, calibrate two component of offset and rotation for PCB.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfect.
29pcs Feeders Supported
22pcs 8mm, 4pcs 12mm, 2pcs 16mm, 1pcs 24mm.
Z axis Detection
Z axis detection can self-checking the height and angle during placement. make sure machine work perfectly with different kinds of components. nozzles are Juki, magnet inside, use your finger can remove it down, no need wrench , very convenient.
Visual industrial control- easy operation
Embedded good quality industrial PC with Linux system. Powerful function, run smoothly. 7 inch LCD touch screen has a wide vision easy learning and operation.
9 kinds of different Juki nozzle supported
High precision placement
Machine can install 501-508 kinds of Juki nozzles
Able to mount 0201,0402,0603,0805-5050,SOP,QFN,LQFP144,all kinds of IC, and diode, triode…
Hunan Charmhigh Electromechanical Equipment Co., Ltd
Contact Us at Any Time