Automatic Calibration SMT Mounter Machine With Vision System
This is CHM-T36VA, a small desk-top pick and place machine
CHM-T36VA, equipped with vision system, is the full-automatic pick and placement machine specially designed for users to connect an external computer so as to modify, edit, and access files conveniently.
It is characterized by 29 tape feeding stacks, support for stick feeders.14 general IC stacks preset at the front end and several self-defined IC tray stacks in the rear.automatic correction to pick components, and automatic positioning through recognition of Mark Point.
1. With vision detection, camera will auto correction component angle and place on PCB board right place. lf heads not picking up components, camera will detect it and go back to pick again, 3 times not picking, machine will alarm and stop, after supply material, then continue working, no need to start over again.
2. If you don't have PCB file, you can create a new work file to program in machine directly.
3. Support single step.
4. Support cut tapes/ bulk material/ tube material.
5. Convenient software, Embedded Linux System of the machine, stable industry main board, independent operation, operation easier and more convenient, learn fast.
6. Need external monitor, room saved, more convenient operation, USB mouse supported as well.
7. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
8. Two mounting heads with 2pcs Juki Nozzles, Juki nozzle inside magnet, so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
9. All-in-one machine, 29pcs feeders included in machine, no need to buy other parts, machine is ready to work.
10. Z axis detection, machine's pull needle automatically return to origin to avoid nozzles broken.
11. Max height component support 5mm.
12. Closed-loop control, X,Y Axis with encoder, not out of step.
13. PCB calibrated by two components position, then rest components will be calibrated automatically.
14. With vacuum detection, with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then pick a new one to mount again.
Why choose Charmhigh?
1.Light weight body,occupy small area
2.User friendly interface no need professional SMT engineer,entry-level device
3.High integrated,no need extra pump or any supporting facility
4.High accuracy and reliability, make up the defection of manual work
5.Low cost,reduce expense to own a professional automatic SMT production line
6.International express with door to door service,3-5 working days delivery
7.Especial for laboratory research and development,samples,to avoid any patents and designs revealment
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||No external air supply required|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||2|
6000cph(optimal without vision detection);
2500cph (optimal with vision detection)
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
|Control System||External computer required (Windows)|
|Drive System||X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported|
|Transmission System||Synchronous belt+ polished rod|
|Feeding System||29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported|
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
The Machine support A Variety of Highprecision Nozzles
Pick and Place Machine Nozzles
|Standard||503||Scope of application||0402,0603|
|506||QFN,TQFP,BGA,Package size within 20mm|
|507||QFN,TQFP,BGA,Package size over 20mm|
Import Taxes Or Duties
1). Import duties, taxes and charges are not included in the item price or shipping charges,These
charges are the buyer' s responsibility.
2).Please check with your country' s customs office to determine what these additional costs will be
prior to bidding/buying.
3).Please confirm detailed information about delivery invoice, like how much price we should write
on delivery invoice, how much transportation charge we should write on invoice , how to describe
the goods etc.
4).These charges are normally collected by the delivering freight (shipping) company or when you
pick the item up-do not confuse them for additional shipping charge.
This SMT machine will be tested well before ship out.
Tools and manuals are complete included in the package.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
Contact Us at Any Time