This machine used 4 mounting heads ,60 YAMAHA feeeders tandard pneumatic feeder stacks (also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported,Three times slides .Mounting speed can reach to 5500cph with visual detection ,8000cph without visual detection.
AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Built-in vacuum pump|
|Mounting Head Quantity||4|
8000cph(optimalwithout vision detection);
|PCB Conveying||Manual operation|
|Nozzle Change||Manual operation|
Built-in computer (embedded Linux operating system),
|Drive System||X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration|
|Transmission System||Synchronous belt + linear guide|
60 Yamaha 8mm standard pneumatic feeder stacks
|Vision System||Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning|
CHMT560P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHMT560P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.
60pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T560P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder.
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement.
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Mark point auto calibration
more accurate with vision system
After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation.
Front IC Bulk Material Area
11pcs front bulk IC stack, suitable for some bulk ICs. more convenient.
IC Tray Supported
software allow 20 user-defined IC tray
User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking.
1. Q: How many nozzles do you supply? Do you sell nozzles and spares?
A: The CHM-T36VA has two nozzle-heads, we supply 4 nozzles. Yes, we do sell nozzles and spares. If you need any spars, just let us know.
2. Q: Do you provide software updates?
A: Customers who buy our machines, we can offer free upgrades software for you.
3. Q: What air supply is required?
A: Oil free compressor and air dryer be used.
4. How about the warranty?
A: We support one year warranty. We will regularly update the software for customers. If there is any doubt in the process of operating the machine, please feel free contact us.
All the spare parts will be provided free of charge for you within the warranty period.
Our company Hunan Charmhigh Electromechanical Equipment Co., Ltd. is located in the Changsha High-tech Development Zone, covering a total area of 3600 square meters ,with more than 100 employees here.
As a professional modern science and technology enterprise capable of both R&D, production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of “Customer First, Innovation Paramount”, Charmhigh has enjoyed high fame at home and abroad.
If you have interest in our products please kindly contact me I will give you immediate reply .
Thanks & best regards
Contact Us at Any Time