Send Message
News
Home > news > Company news about What to do if the Air Pressure of the Pick and Place Machine is Insufficient?
Events
Contact Us
86-181-0073-3752
Contact Now

What to do if the Air Pressure of the Pick and Place Machine is Insufficient?

2023-03-21

Latest company news about What to do if the Air Pressure of the Pick and Place Machine is Insufficient?

latest company news about What to do if the Air Pressure of the Pick and Place Machine is Insufficient?  0

Many friends who use the pick and place machine know that the pressure of the pick and place machine is a very important part. In the process of using the pick and place machine, not only voltage is needed, but also pressure is needed to help use it. Sometimes we find that the pressure of the pick and place machine is insufficient.

What should I do if the alarm is generated due to insufficient air pressure? Insufficient air pressure? Now Charmhigh Electromechanical will explain in detail the consequences and solutions of the insufficient air pressure of the pick and place machine, and see if it can help everyone!

 

When our machine is running, since the air pressure is limited by the machine, when the air pressure is lower or higher than the target value, the pick and place machine will give an alarm, and the related parts of the pick and place machine will also fail due to the following reasons:

 

latest company news about What to do if the Air Pressure of the Pick and Place Machine is Insufficient?  1

 

1. Abnormal paper supply: the paper feeder cannot supply paper normally. If the nozzle is working correctly at this point, the nozzle may be damaged.


2.Abnormal stop: This will seriously affect the visual positioning of the pick and place machine, and may cause the pick and place machine head to touch the PCB board.


3. Improper head placement: The action of placing the head is affected, making it impossible to expand and contract in the usual way.

 

We know the danger of too low air pressure, and we have to address it. Usually the cause of low air pressure is deformation, damage, clogged nozzle, insufficient air pressure, air leakage and premature, which cause the nozzle to not absorb or absorb materials normally. If the material is not correct, the nozzle needs to be replaced frequently and the nozzle should be maintained frequently to make the mounting operation of the pick and place machine go smoothly. To sum up, the above is the solution shared by Charmhigh Electromechanical website if you encounter the problem of insufficient air pressure of the pick and place machine. I hope it will be helpful to you. If you need to know and consult other product content, you can enter our official website of Charmhigh Electromechanical pick and place machine to learn more or contact us about your needs and so on.

Send your inquiry directly to us

Privacy Policy China Good Quality SMT Pick And Place Machine Supplier. Copyright © 2021-2024 charmhighsmt.com . All Rights Reserved.