What are the requirements for choosing an air compressor for a pick and place machine?
The mounting process is that the pick and place machine uses vacuum suction and blowing force to mount various components on the circuit board through the vacuum pump. An air compressor is needed during the operation of the pick and place machine. What are the requirements for choosing an air compressor for Charmhigh Electromechanical Shared pick and place machine?
The selection requirements of the pick and place machine for the air compressor are mainly as follows:
1. The compressed air should be dry enough, and the air compressor should be equipped with a cold dryer.
2. The dust, oil and other magazines in the compressed air should be as little as possible, and a filter should be installed.
3. The pressure of the compressed air must meet the pressure requirements and be stable enough to work continuously for a long time. It must be equipped with an air storage tank, usually with two sets of air compressors to ensure uninterrupted work.
When selecting an air compressor for an automatic pick and place machine, it is necessary to evaluate the air consumption. The larger the air consumption, the selected air compressor will be slightly larger.
The air compressor is a power equipment commonly used in the manufacturing industry that can convert mechanical energy into gas pressure. Every pick and place machine must be used. Its function is to supply air and provide the gas required for production. The pick and place machine industry is closely related to air compressors. When choosing an air compressor, try to choose a large manufacturer. If necessary, you may choose a permanent magnet variable frequency air compressor to save power.
Send your inquiry directly to us