Place of Origin:
Support 15000CPH SMT Pick and Place Machine (CHM-750) for PCB Prototype and SMT Assembly
This is CHM-750, a high-performance pick and place machine of Hunan Charmhigh Electromechanical Equipment Co., Ltd.
The CHM-750 is characterized by 50 feeder stacks, support for Yamaha pneumatic feeders and stick feeders with tubular components,automatic correction to pick components, 4 heads capable of 360-degree rotation, automatic positioning through recognition of Mark Point for high mounting accuracy, integrated operation with built-in industrial computer.
CHM-750 main features
1. Model number: CHM-750
2. Brand: Charmhigh
3. main configuration: type of desktop + 6-head 50 feeders + automatic calibrate pcb +built-in pc and built-in linux system embedded + closed circuit control engine with coded + Nine cameras + linear track
4. feeder: yamaha cl feeder/electric feeder (feeders need to buy separately)
5. pcb area: 400mm*350mm
6. Component: The CHM-750 support 0201/0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc.
|Power Supply||AC220V (50Hz, single phase), 2.8kW|
|Air Supply||0.5MPa ~0.7MPa|
|Vacuum Generation||Vacuum generator|
|Mounting Head Quantity||6|
|Mounting Speed||15000cph (optimal)|
|PCB Conveying||3-section-rail automatic conveying|
|Nozzle Change||Automatic nozzle change (19-hole nozzle library)|
Built-in industrial computer (Windows 7)
equipped with monitor, keyboard, and mouse
|Drive System||X&Y axis driven by servo motors (Y axis by double motors); adopting flexible S-curve acceleration and deceleration|
|Transmission System||Ball screw + linear guide (Y axis with double screws)|
50 Yamaha 8mm standard pneumatic/electric feeder stacks
(also suitable for IC tray and stick feeder)
Snapshot camera×6 (component size applicable: 16mm×16mm);
IC camera×1 (component size applicable: 36mm×36mm);
1. Whether the linear guide rail and round rod have an impact on the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no effect on the accuracy of the mounting machine, the precision of the mounting machine depends on the motor and software control system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports cross-platform hardware support, rich software support, reliable security and stability.
3. Do you use electromagnetic coil to control the pulling needles? What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic coil. Comparing with the cylinder control, the electromagnetic coil control has the characteristics of faster response, softer force and less noise. The quick reaction can speed up the mounting speed; Soft strength refers to the strength of the pull needle is soft when pressing down, and the pull needle is not easy to break.
The machine has a warranty period of 1 year from the time of purchase and lifetime service.
Each machine 100% test well before ship out.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
Send your inquiry directly to us